Mask BFE Testing Machine
Mask BFE Testing Machine is used to test the percentage of material containing bacterial suspended particles at a specific flow rate.
Features:
1. Mask BFE Testing Machine: negative pressure test system, can protect the safety of the operator.
2. Peristaltic pump built in the negative pressure cabinet, A, B channel 28.3L/min.
3. The flow rate of the peristaltic pump can be set.
4. BFE Tester atomization effect is good.
Mask BFE Testing Machine test principle:
Bacterial filtration efficiency Tester consists of aerosol generation system, aerosol chamber and aerosol transmission device, negative pressure cabinet, 28.3 l/min carbon sampler and other components.The entire detector is controlled by the console.The console adopts microcomputer control system to coordinate and control the work of aerosol generating system, transmission system, negative pressure cabinet and sampling system, and display the working status in real time.The entire measurement work is done automatically.
Xenon lamp climate test chamber for the industry
UV aging test chamber test method
Test Equipment
Trolley furnace is a common high-temperature furnace used for high-temperature processes such as heat treatment and smelting. However, various malfunctions may occur with the trolley furnace during use. This article will introduce some common trolley furnace failures and their solutions.Influence of Reaction Sintering Process on Properties of Silicon Carbide Ceramics Fault 1: Uneven heating Uneven heating of the trolley furnace may lead to unstable product quality and affect production efficiency. Common reasons include: ·The temperature inside the furnace is uneven. At this time, you can try to adjust the position of the heater, add insulation materials, etc.tck6340-tck6340s-tck6350-cnc-slant-bed-lathe-machine ·The heater is damaged. Check whether the heater is damaged or aged and needs to be replaced. ·Control system failure. Check whether the control system is working properly and whether electronic components need to be replaced or software updated.tck500s Fault 2: Overheating or cold in the furnace A furnace that is too hot or cold can also affect product quality, so it is crucial to identify and resolve these issues promptly. The following are possible causes of these problems: ·The furnace temperature controller is faulty. Check and replace the controller and correct the control parameters.automatic-horizontal-band-saw-for-profile-gz4250h ·Thermal sensor failure. Check whether the temperature sensor is working properly and replace or repair it. ·Heater power supply problem. Check whether the heater circuit is normal and whether it needs to be replaced or repaired.